Plastopor EPS 70

Thermal conductivity coefficient λd: 0,039 W/mK

Plastopor styrofoam is produced using the most modern vacuum technology and therefore its quality fully meets the requirements of Croatian (HRN EN 13163) and European standards (EN 13163).

Primjena:

Thermal insulation in construction.
For insulating walls, roofs and floors with less load.

Properties:

Plastopor EPS 70 panels do not affect human health and the environment (without CFC, FCKW, HBCD). Hardly flammable (higher requirement than “self-extinguishing”), light weight, simple installation. Board format 1000 x 500 mm. Plate thickness range from 10 mm to 300 mm. The characteristics correspond to the requirements of HRN EN 13163:2012+A1:2015. They are stable in the temperature range, permanently up to 80°C and short-term up to 95°C. Chemically resistant to most construction materials with which it comes into contact, for more detailed information and ambiguities, contact the manufacturer.

EPS-EN13163 –T(2)-L(3)-W(3)-S(5)-P(10)- DS(N)5-BS115-CS(10)70

Thickness (mm)	Thermal conductivity	Thermal resistance	m2 in the package	Plate in the package	Volume (m3)

10	0,039	0,26	25,00	50	0,250
20	0,039	0,51	12,50	25	0,250
30	0,039	0,77	8,00	16	0,240
40	0,039	1,03	6,00	12	0,240
50	0,039	1,28	5,00	10	0,250
60	0,039	1,54	4,00	8	0,240
70	0,039	1,79	3,50	7	0,245
80	0,039	2,05	3,00	6	0,240
90	0,039	2,31	2,50	5	0,225
100	0,039	2,56	2,50	5	0,250
110	0,039	2,82	2,00	4	0,220
120	0,039	3,08	2,00	4	0,240
130	0,039	3,33	2,00	4	0,260
140	0,039	3,59	1,50	3	0,210
150	0,039	3,85	1,50	3	0,225
160	0,039	4,10	1,50	3	0,240
170	0,039	4,36	1,50	3	0,255
180	0,039	4,62	1,00	2	0,180
190	0,039	4,87	1,00	2	0,190
200	0,039	5,13	1,00	2	0,200
210	0,039	5,38	1,00	2	0,210
220	0,039	5,64	1,00	2	0,220
230	0,039	5,90	1,00	2	0,230
240	0,039	6,15	1,00	2	0,240
250	0,039	6,41	1,00	2	0,250
260	0,039	6,67	0,50	1	0,130
270	0,039	6,92	0,50	1	0,135
280	0,039	7,18	0,50	1	0,140
290	0,039	7,44	0,50	1	0,145
300	0,039	7,69	0,50	1	0,150